مرحلات الطاقة
عدد منتجات هذا القسم 9 منتج.
مرحل سوليد ستات تيار مستمر متحكم بتيار متردد Solid State Relay DA SSR 10A/25A/40A/60A/80A/100A
متوفر
Solid State Relay DA SSR 10A/25A/40A/60A/80A/100A DC Controlled AC
3.500 ر.ع
مرحل بقناتين 5V High Level Trigger SSR Relay
متوفر
5V 2 Channel SSR Solid State Relay Board Power Switch High Level Trigger
Working Voltage: DC 5V
Working Current: 160mA
Input Control Voltage: 0-2.5V(low level,OFF), 3.3-5V(high level, ON)
Compatible Load: AC 100-240V 2A
Module Size: 55 X 33 X 25mm/2.17 X 1.30 X 0.98inch(L*W*H)
Working Voltage: DC 5V
Working Current: 160mA
Input Control Voltage: 0-2.5V(low level,OFF), 3.3-5V(high level, ON)
Compatible Load: AC 100-240V 2A
Module Size: 55 X 33 X 25mm/2.17 X 1.30 X 0.98inch(L*W*H)
2.000 ر.ع
مرحل بقناة واحدة 5V Low Level Trigger SSR Relay
متوفر بكمية محدودة !
5V Relay 1 Channel SSR Low Level Solid State Relay Module 250V 2A
1.000 ر.ع
شيلد مرحل بـ أربع قنوات للاردوينو اونو Arduino UNO Shield
متوفر
4 Channel 5v Relay Shield Module for Arduino UNO R3
Standard for Shield interfaces and shape
Can continue to stack other for expansion boards
3 M3 screw positioning holes for easy installation
High Drive (5V or 3.3V) normally open contact closure
Onboard relay indicator (red)
2.500 ر.ع
مرحل بقناة واحدة 5V Relay Low Trigger
متوفر بكمية محدودة !
1 Channel 5V Relay Module Low level Trigger 1-Channel relay module, with photoelectric isolation dc or ac signal control, can control 220 v ac load 5v relay, low level trigger
0.800 ر.ع
مرحل بـ أربع قنوات 5V Low Level Trigger SSR Relay
متوفر بكمية محدودة !
Low level trigger 4-channel 5v Solid State Relay Module Board SSR
Led indicator for each relay.
Input control signal voltage: 0V - 0.5V Low stage (SSR is OFF), 0.5V - 2.5V (unknown state), 2.5V - 20V High state (SSR is ON); SSR Output (each channel);
Load voltage range: 75 to 264VAC (50/60Hz); Load current: 0.1 to 2 AMP Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
Led indicator for each relay.
Input control signal voltage: 0V - 0.5V Low stage (SSR is OFF), 0.5V - 2.5V (unknown state), 2.5V - 20V High state (SSR is ON); SSR Output (each channel);
Load voltage range: 75 to 264VAC (50/60Hz); Load current: 0.1 to 2 AMP Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
4.000 ر.ع
مرحل بـ ثماني قنوات 5V Relay
غير متوفر
4Channel Relay Module DC 5V
Equiped with high-current relay, AC250V 10A ; DC30V 10A
5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current
Be able to control various appliances, and other equipments with large current
Application:Supports all MCU control, The industrial field, PLC control, Smart home control
Indication LED's for Relay output status
Equiped with high-current relay, AC250V 10A ; DC30V 10A
5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current
Be able to control various appliances, and other equipments with large current
Application:Supports all MCU control, The industrial field, PLC control, Smart home control
Indication LED's for Relay output status
4.000 ر.ع
مرحل بـ أربع قنوات 5V Relay
متوفر بكمية محدودة !
4 Channel Relay Module DC 5V
Equiped with high-current relay, AC250V 10A ; DC30V 10A
5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current
Be able to control various appliances, and other equipments with large current
Application:Supports all MCU control, The industrial field, PLC control, Smart home control
Indication LED's for Relay output status
Equiped with high-current relay, AC250V 10A ; DC30V 10A
5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current
Be able to control various appliances, and other equipments with large current
Application:Supports all MCU control, The industrial field, PLC control, Smart home control
Indication LED's for Relay output status
2.000 ر.ع
مرحل بقناة واحدة 5V High-Low Trigger
متوفر
1 Channel 5V Relay Module Board Shield for Arduino with Optocoupler Support High and Low Level Trigger
Maximum load: AC 250V/10A, DC 30V/10A
SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA
The module voltage 5V
The module can be set high or low triggered by jumper
Maximum load: AC 250V/10A, DC 30V/10A
SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA
The module voltage 5V
The module can be set high or low triggered by jumper
1.000 ر.ع