MQ135 Gas Sensor For Air Quality Harmful Gases Detects
MQ135 Gas Sensor For Air Quality harmful gases Detects
MQ135 Gas Sensor For Air Quality harmful gases Detects
The MQ-135 Gas sensor can detect gases like Ammonia (NH3), sulfur (S), Benzene (C6H6), CO2, and other harmful gases and smoke. Similar to other MQ series gas sensor, this sensor also has a digital and analog output pin. When the level of these gases go beyond a threshold limit in the air the digital pin goes high. This threshold value can be set by using the on-board potentiometer. The analog output pin, outputs an analog voltage which can be used to approximate the level of these gases in the atmosphere.
The MQ135 air quality sensor module operates at 5V and consumes around 150mA. It requires some pre-heating before it could actually give accurate results.
Details of MQ135 Sensor:
The MQ135 is one of the popular gas sensors from the MQ series of sensors that are commonly used in air quality control equipment. It operates from 2.5V to 5.0V and can provide both digital and analog output.
Note that all MQ sensors have to be powered up for a pre-heat duration for the sensor to warm up before it can start working. This pre-heat time is normally between 30 seconds to a couple of minutes. When you power up the module the power LED will turn on, leave the module in this state till the pre-heat duration is completed.
Technical Specifications of MQ135 Gas Sensor:
Operating Voltage: 2.5V to 5.0V
Power consumption: 150mA
Detect/Measure: NH3, Nox, CO2, Alcohol, Benzene, Smoke
Typical operating Voltage: 5V
Digital Output: 0V to 5V (TTL Logic ) @ 5V Vcc
Analog Output: 0-5V @ 5V Vcc
Detect Harmful Gases using Digital Pin:
The digital output pin of the sensor can be used to detect harmful gases in the environment. The sensitivity of the digital pin can be controlled by using the 10k potentiometer. If the gas is detected the indicator LED D0 will turn on and the digital pin will go from logic high to logic low (0V). The LM393 Op-Amp Comparator IC is used to compare the actual gas value with the value set using the potentiometer. If the actual gas value increases than the set value then the digital output pin gets low.
Because of the onboard LM393 comparator IC the MQ135 Gas sensor module can also be used without the need of an external microcontroller. Simply power up the module and set the sensitivity of the digital pin using the potentiometer, then when the module detects the gas the digital pin will go low. This digital pin can directly be used to drive a buzzer or LED with the help of simple transistors.
The Purchase Policy "Aafaq Asia Store":
-
Before approving the order, the client must search for product details and methods of using it from different internet pages.
-
Before approving the order, the client should make sure that the desired options are chosen correctly for each product -if there are different options on the product page-
-
It is possible that some products in the client's order are not available, and the team will notify the owner of the order in the event that a product is not available or the required option of the product is not available via e-mail or mobile.
Delivery & Shipping Policy "Aafaq Asia Store":
-
Shipments will send to the client's address within 1-2 business days only, after verification of the validity of the order.
-
Aafaq Asia Store has the right to choose the appropriate shipping company to send the client’s order to its address registered in the store, knowing that the work team seeks to choose the fastest way to deliver the order to the client’s State/Region.
-
After sending the shipment, Aafaq Asia team will send the shipment invoice and shipping company contact numbers to the e-mail registered in the store. so that the client can follow up his shipment.
Compensation Policy "Aafaq Asia Store":
-
Aafaq Asia Store is obliged to compensate the client for the products that are not available in his request with 100% of the product value, after or during the period of the order's shipment.
-
The client will not be compensated for any amounts for any product that he chooses and has not read its details and method of use from the product page or from other internet pages.
-
The client has the right to request compensation for the product provided to you around you within the seven days following the date of sending the order shipping bill to his address, and he is not entitled to claim any compensation after the seven days have passed -Unless the product has a factory warranty-.
-
Claims for compensation will not be considered if the client has used the product or obtained its benefit. Aafaq Asia Store has the right to inspect the product before agreeing to compensation to ensure its in good condition.
-
The client is not entitled to request compensation for the product in the following cases:
-
If the product was manufactured at the request of the client or according to the specifications specified by it, with the exception of products that are defective or that violate the specifications specified by the client.
-
If the product consisted of video tapes, CDs, CDs, or information programs used.
-
If the product is newspapers, magazines, publications, books, or other types of literature.
-
If a defect appears in the product due to poor possession of the client.
-
If the order deals with purchasing software download products via the Internet.
Refund and Exchange "Aafaq Asia Store":
-
The client has the right to open a compensation request from Service Center correspondence within the seven days following the date of sending the order shipping invoice to his address, and he is not entitled to claim any compensation after the passage of seven days -Unless the product has a factory warranty-, the compensation request will be answered after his evaluation by the work team, whether compensation is through purchase coupon, financial compensation, or return and exchange -with the customer bearing the cost of returning the product to the store's nearest branch-.
